2J68A3-2X2823 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2J68A3-2X2823: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND SINGLE ACTUATOR, shaft_length: 0.688 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 2.375 INCHES MAXIMUM IN, pole_quantity: 4 EACH SECTION FRONT, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5930-00-419-5328, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2J68A3-2X2823

NSN: 5930-00-419-5328
FSC: 5930 — Switches
CAGE: 54294 — SHALLCROSS INC (USA)

SPECIFICATIONS

shaft_type	ROUND SINGLE ACTUATOR
shaft_length	0.688 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	2.375 INCHES MAXIMUM IN
pole_quantity	4 EACH SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	2.375 INCHES MAXIMUM IN
overall_length	2.423 INCHES MAXIMUM IN
shaft_diameter	0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
throw_quantity	3 EACH SECTION REAR
mounting_method	THREADED BUSHING SINGLE MOUNTING FACILITY
NSN	5930-00-419-5328

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM AT 12:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DETENT ROTATIONAL TORQUE RANGE: +1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN

•

ROTOR THROUGH CONNECTION QUANTITY: 4 EACH SECTION

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND SINGLE ACTUATOR
OVERALL HEIGHT	2.375 INCHES MAXIMUM IN
SHAFT DIAMETER	0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM AT 12:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
DETENT ROTATIONAL TORQUE RANGE	+1.500 TO 6.000 INCH-POUNDS SINGLE ACTUATOR IN
ROTOR THROUGH CONNECTION QUANTITY	4 EACH SECTION
MOUNTING METHOD	THREADED BUSHING SINGLE MOUNTING FACILITY
THREAD LENGTH	0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY IN

SUBSTITUTES & CROSS-REFERENCES 2

208448Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

SR14S30E3HG0-1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2J68A3-2X2823?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2J68A3-2X2823?

2J68A3-2X2823 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2J68A3-2X2823?

There are 2 known substitutes for 2J68A3-2X2823: 208448, SR14S30E3HG0-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 2J68A3-2X2823?

2J68A3-2X2823 is cataloged in the U.S. Government catalog under NSN 5930-00-419-5328. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2J68A3-2X2823 — SWITCH,ROTARY

Request a Quote — 2J68A3-2X2823