2J56D5-3-001 — SWITCH,ROTARY

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2J56D5-3-001: SWITCH,ROTARY.

The SWITCH,ROTARY is a the manufacturer industrial component. Key specifications include shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.216 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 0.625 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A SINGLE MOUNTING FACILITY A, overall_width: 1.750 INCHES NOMINAL IN, pole_quantity: 2 EACH SECTION FRONT. This part is cataloged in the U.S.

Government catalog under NSN 5930-01-084-7814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2J56D5-3-001

NSN: 5930-01-084-7814
FSC: 5930 — Switches
CAGE: 82121 — ELECTRO SWITCH CORP. DBA ELECTRO SWITCH CORP (USA)

SPECIFICATIONS

shaft_type	ROUND, FLATTED SINGLE ACTUATOR
flat_height	0.216 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length	0.625 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class	2A SINGLE MOUNTING FACILITY A
overall_width	1.750 INCHES NOMINAL IN
pole_quantity	2 EACH SECTION FRONT
terminal_type	TAB, SOLDER LUG
thread_length	0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
overall_height	1.750 INCHES NOMINAL IN
overall_length	2.923 INCHES NOMINAL IN
shaft_diameter	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity	5 EACH SECTION FRONT
NSN	5930-01-084-7814

COMPONENT DIAGRAM

KEY FEATURES

•

SHAFT TYPE: ROUND, FLATTED SINGLE ACTUATOR

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

SWITCH CONTACT BASIC DESIGN: NONPILE-UP SYMMETRICAL

•

NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL AT 12:00 OCLOCK IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

FIRST FLAT LENGTH: 0.250 INCHES NOMINAL SINGLE ACTUATOR IN

•

DETENT ROTATIONAL TORQUE RANGE: +1.500 TO 8.000 INCH-POUNDS SINGLE ACTUATOR IN

TECHNICAL CHARACTERISTICS

SHAFT TYPE	ROUND, FLATTED SINGLE ACTUATOR
OVERALL HEIGHT	1.750 INCHES NOMINAL IN
SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
NONTURN DEVICE RADIUS	0.531 INCHES NOMINAL AT 12:00 OCLOCK IN
TERMINAL TYPE	TAB, SOLDER LUG
FIRST FLAT LENGTH	0.250 INCHES NOMINAL SINGLE ACTUATOR IN
DETENT ROTATIONAL TORQUE RANGE	+1.500 TO 8.000 INCH-POUNDS SINGLE ACTUATOR IN
CONTACT LOAD CURRENT RATING	0.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	0.5 AMPERES RESISTIVE LOAD DC AT SEA LEVEL

SUBSTITUTES & CROSS-REFERENCES 2

104637-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

2J56D5-3-GMFWSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required

Ready to buy 2J56D5-3-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2J56D5-3-001?

2J56D5-3-001 is a SWITCH,ROTARY. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2J56D5-3-001?

There are 2 known substitutes for 2J56D5-3-001: 104637-1, 2J56D5-3-GMFW. Substitute compatibility should be verified for your specific system.

What is the NSN for 2J56D5-3-001?

2J56D5-3-001 is cataloged in the U.S. Government catalog under NSN 5930-01-084-7814. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2J56D5-3-001 — SWITCH,ROTARY

Request a Quote — 2J56D5-3-001