PartsTable
Technical Data Sheet
Download PDF

2J4200 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2J4200: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1022 OR STEEL COMP 1117 OVERALL, end_radius: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, fork_depth: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN, overall_width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-791-9113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2J4200
NSN: 5340-00-791-9113
FSC: 5340 — Hardware, Commercial
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1022 OR STEEL COMP 1117 OVERALL
end_radius0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
fork_depth1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
thread_class2B ROD CONNECTION
hole_diameter0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
overall_width0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.750 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
fork_span_width0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
special_featuresPIVOT PIN HOLE CASE HARDENED
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-791-9113
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2J4200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.235 INCHES NOMINAL IN
•
END RADIUS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.750 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
FORK SPAN WIDTH0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FORK ARM THICKNESS0.235 INCHES NOMINAL IN
END RADIUS0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
THREAD LENGTH0.750 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.250 INCHES ROD CONNECTION IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2J4200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2J4200?
2J4200 is a CLEVIS,ROD END.
What is the NSN for 2J4200?
2J4200 is cataloged in the U.S. Government catalog under NSN 5340-00-791-9113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2J4200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.