PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2IN OD X 1.37IN ID X 5/16THK

2IN OD X 1.37IN ID X 5/16THK — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: GRAPHITE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 2.000 INCHES NOMINAL IN, center_hole_diameter: 1.370 INCHES NOMINAL IN, cross-sectional_height: 0.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-01-414-5010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2IN OD X 1.37IN ID X 5/16THK
NSN: 5330-01-414-5010
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialGRAPHITE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter2.000 INCHES NOMINAL IN
center_hole_diameter1.370 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-P-24503, TYII CL2 GRI MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-414-5010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2IN OD X 1.37IN ID X 5/16THK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: GRAPHITE OVERALL
•
CENTER HOLE DIAMETER: 1.370 INCHES NOMINAL IN
•
CUT TYPE: DIAGONAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-24503, TYII CL2 GRI MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 2.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALGRAPHITE OVERALL
CENTER HOLE DIAMETER1.370 INCHES NOMINAL IN
CUT TYPEDIAGONAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-24503, TYII CL2 GRI MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER2.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3.375OD X 2.375 ID X .50 THKInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-P-24503 TY2, CL2, GRIInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-P-24503InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2536-5-16InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-P-24503 TY II,CL 2,GR IInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M24503TY2CL2GRI2.5X3.375X0.437InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2IN OD X 1.37IN ID X 5/16THK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2IN OD X 1.37IN ID X 5/16THK?
2IN OD X 1.37IN ID X 5/16THK is a PACKING,PREFORMED.
What parts can replace 2IN OD X 1.37IN ID X 5/16THK?
There are 7 known substitutes for 2IN OD X 1.37IN ID X 5/16THK: 3.375OD X 2.375 ID X .50 THK, MIL-P-24503 TY2, CL2, GRI, MIL-P-24503 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2IN OD X 1.37IN ID X 5/16THK?
2IN OD X 1.37IN ID X 5/16THK is cataloged in the Federal Logistics Information System under NSN 5330-01-414-5010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2IN OD X 1.37IN ID X 5/16THK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026