PartsTable / O-RING / 2HK146
2HK146
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-395-5737, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2HK146
NSN: 5331-00-395-5737 FSC: 5331 — O-RINGCAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 90.0 SHORE DUROMETER A NOMINAL outside_diameter 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN center_hole_diameter 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN elongation_percentage 160 MAXIMUM cross-sectional_height 0.114 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN NSN 5331-00-395-5737
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2HK146
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
• OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
• ELONGATION PERCENTAGE: 160 MAXIMUM
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 90.0 SHORE DUROMETER A NOMINAL OUTSIDE DIAMETER 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN ELONGATION PERCENTAGE 160 MAXIMUM MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.114 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
11101 Interchangeable interchangeable cross-reference
interchangeable
CA030166 Interchangeable interchangeable cross-reference
interchangeable
3912 Interchangeable interchangeable cross-reference
interchangeable
1385789 ITEM 24 Interchangeable interchangeable cross-reference
interchangeable
700-912-355 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2HK146?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2HK146?
2HK146 is a O-RING.
What parts can replace 2HK146?
There are 30 known substitutes for 2HK146: 11101, CA030166, 3912 and 27 more. Substitute compatibility should be verified for your specific system.
Is 2HK146 still available?
2HK146 is currently cancelled.