2HA-12 — FINISHING MACHINE,ABRASION,ROTAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

2HA-12: FINISHING MACHINE,ABRASION,ROTAR.

FINISHING MACHINE,ABRASION,ROTAR. Key specifications include special_features: 0.125INCH OUTSIDE DIAMETER IN, center_hole_diameter: 0.240 INCHES NOMINAL IN, cross-sectional_height: 0.060 INCHES NOMINAL IN, end_item_identification: 2320-01-465-2260, part_name_assigned_by_controlling_agency: O RING. This part is cataloged in the U.S.

Government catalog under NSN 3680-01-251-3605, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2HA-12

NSN: 3680-01-251-3605
NIINs: 012513605, 015170356
FSC: 3680 — Foundry Machinery, Related Equipment and Supplies
CAGE: 19301 — HARPER CO THE (USA)

SPECIFICATIONS

special_features	0.125INCH OUTSIDE DIAMETER IN
center_hole_diameter	0.240 INCHES NOMINAL IN
cross-sectional_height	0.060 INCHES NOMINAL IN
end_item_identification	2320-01-465-2260
part_name_assigned_by_controlling_agency	O RING
NSN	3680-01-251-3605

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: O/A HG 6 FT 5 IN.,O/A LG 5 FT 8 IN.,O/A WD 3 FT 7 IN.; WT 2600 LBS; 5HP; ELECT. SUPPLY 3 PHASE,60 CYCLE,230/460 VOLT; AIR SUPPLY 70 PSI; SPEED VAR 5 TO 25 GS; 2 DRUMS,12 IN. DIA 12 IN. LONG NOM 0.6 CU FT TOTAL VOL PER DRUM; SNAP-IN MOULDED POLYURETHANE DRUM LININGS; TURRET DRIVE V-BELT THROUGH JACKSHAFT; DRUM DRIVE ENCLOSED CHAIN; FAST AND SLOW SPEED TIMERS W/ SPEED A ND PROCESS CYCLE SELECTORS; SAFETY INTERLOCK FOR MAIN GUARD AND VIBRATION SWITCH; AIR OPERATED TURRET AND DRUM BRAKES; CONTROL VOLTAGE 110 VAC VAC

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

O/A HG 6 FT 5 IN.,O/A LG 5 FT 8 IN.,O/A WD 3 FT 7 IN.; WT 2600 LBS; 5HP; ELECT. SUPPLY 3 PHASE,60 CYCLE,230/460 VOLT; AIR SUPPLY 70 PSI; SPEED VAR 5 TO 25 GS; 2 DRUMS,12 IN. DIA 12 IN. LONG NOM 0.6 CU FT TOTAL VOL PER DRUM; SNAP-IN MOULDED POLYURETHANE DRUM LININGS; TURRET DRIVE V-BELT THROUGH JACKSHAFT; DRUM DRIVE ENCLOSED CHAIN; FAST AND SLOW SPEED TIMERS W/ SPEED A ND PROCESS CYCLE SELECTORS; SAFETY INTERLOCK FOR MAIN GUARD AND VIBRATION SWITCH; AIR OPERATED TURRET AND DRUM BRAKES; CONTROL VOLTAGE 110 VAC VAC

SUBSTITUTES & CROSS-REFERENCES 1

3680-6112-1121Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2HA-12?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2HA-12?

2HA-12 is a FINISHING MACHINE,ABRASION,ROTAR.

What parts can replace 2HA-12?

There is 1 known substitute for 2HA-12: 3680-6112-1121. Substitute compatibility should be verified for your specific system.

What is the NSN for 2HA-12?

2HA-12 is cataloged in the U.S. Government catalog under NSN 3680-01-251-3605. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2HA-12 — FINISHING MACHINE,ABRASION,ROTAR

Request a Quote — 2HA-12