PartsTable
Technical Data Sheet
Download PDF

2GL50 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2GL50: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_style: BUSHING MOUNT, body_width: 1.025 INCHES MAXIMUM IN, body_height: 1.250 INCHES MAXIMUM IN, body_length: 1.346 INCHES MAXIMUM IN, thread_class: 2A A, actuator_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-341-3338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2GL50
NSN: 5315-01-341-3338
NIINs: 013413338, 013549794
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
body_styleBUSHING MOUNT
body_width1.025 INCHES MAXIMUM IN
body_height1.250 INCHES MAXIMUM IN
body_length1.346 INCHES MAXIMUM IN
thread_class2A A
actuator_styleROUND
bushing_length0.470 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
actuator_height0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
first_end_styleSQUARE
mounting_methodTHREADED BUSHING
actuator_diameter0.240 INCHES NOMINAL IN
NSN5315-01-341-3338
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2GL50 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.7500 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 3.375 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND HOLE DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.250 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.7500 INCHES NOMINAL IN
PIN OVERALL LENGTH3.375 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
12405-GReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2GL50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2GL50?
2GL50 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2GL50?
There is 1 known substitute for 2GL50: 12405-G. Substitute compatibility should be verified for your specific system.
What is the NSN for 2GL50?
2GL50 is cataloged in the U.S. Government catalog under NSN 5315-01-341-3338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2GL50

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.