PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2GE411
2GE411 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 35.0 MILLIMETERS NOMINAL MM, cone_width: 43.0 MILLIMETERS NOMINAL MM, bore_diameter: 55.0 MILLIMETERS NOMINAL MM, overall_width: 45.5 MILLIMETERS NOMINAL MM, standout_width: 10.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-318-2058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2GE411
NSN: 3110-01-318-2058
FSC: 3110
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width35.0 MILLIMETERS NOMINAL MM
cone_width43.0 MILLIMETERS NOMINAL MM
bore_diameter55.0 MILLIMETERS NOMINAL MM
overall_width45.5 MILLIMETERS NOMINAL MM
standout_width10.0 MILLIMETERS NOMINAL MM
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius2.5 MILLIMETERS MINIMUM MM
backface_corner_radius2.0 MILLIMETERS MINIMUM MM
overall_outside_diameter120.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-318-2058
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2GE411 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CUP WIDTH: 35.0 MILLIMETERS NOMINAL MM
•
CONE WIDTH: 43.0 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 120.0 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 55.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
RETAINER FABRICATION METHOD: PRESSED
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CUP WIDTH35.0 MILLIMETERS NOMINAL MM
CONE WIDTH43.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER120.0 MILLIMETERS NOMINAL MM
BORE DIAMETER55.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
RETAINER FABRICATION METHODPRESSED
STANDOUT WIDTH10.0 MILLIMETERS NOMINAL MM
BACKFACE CORNER RADIUS2.0 MILLIMETERS MINIMUM MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3231-1Interchangeable
interchangeable cross-reference
interchangeable
460-3231-01-03Interchangeable
interchangeable cross-reference
interchangeable
460-3231-01-04-00Interchangeable
interchangeable cross-reference
interchangeable
D2222-2MInterchangeable
interchangeable cross-reference
interchangeable
EHW340X11G-112 PIECE 12Interchangeable
Same NIIN cross-reference
interchangeable
V75650616Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2GE411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2GE411?
2GE411 is a BEARING,ROLLER,TAPERED.
What parts can replace 2GE411?
There are 7 known substitutes for 2GE411: 3231-1, 460-3231-01-03, 460-3231-01-04-00 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2GE411?
2GE411 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-318-2058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2GE411

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026