PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2CLEAT
2CLEAT ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: FIBER LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.438 INCHES NOMINAL IN, overall_length: 0.938 INCHES NOMINAL IN, style_designator: DOUBLE ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-3747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2CLEAT
NSN: 5340-00-598-3747
FSC: 5340
CAGE: 15238 — ITT SEMICONDUCTORS A DIVISION OF INTERNATIONAL TELEPHONE AND TELEGRAPH CORP (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialFIBER LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.438 INCHES NOMINAL IN
overall_length0.938 INCHES NOMINAL IN
style_designatorDOUBLE ARCH
material_thickness0.063 INCHES NOMINAL IN
mounting_hole_size0.125 INCHES NOMINAL IN
inside_diameter/arch_length0.188 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.125 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.313 INCHES NOMINAL IN
NSN5340-00-598-3747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2CLEAT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.125 INCHES NOMINAL IN
•
MATERIAL: FIBER LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: DOUBLE ARCH
•
INSIDE DIAMETER/ARCH LENGTH: 0.188 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.313 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.438 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.125 INCHES NOMINAL IN
MATERIALFIBER LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORDOUBLE ARCH
INSIDE DIAMETER/ARCH LENGTH0.188 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.313 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.125 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
D4587-1-26Upgraded Successor
successor cross-reference
successor
2Upgraded Successor
successor cross-reference
successor
2-WBUpgraded Successor
successor cross-reference
successor
68372Upgraded Successor
successor cross-reference
successor
917953Upgraded Successor
successor cross-reference
successor
9M147-2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2CLEAT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2CLEAT?
2CLEAT is a STRAP,RETAINING.
What parts can replace 2CLEAT?
There are 8 known substitutes for 2CLEAT: D4587-1-26, 2, 2-WB and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2CLEAT?
2CLEAT is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-3747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2CLEAT

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026