2C6527G03: MAINTENANCE KIT,AIRCRAFT.
The MAINTENANCE KIT,AIRCRAFT is a the manufacturer industrial component. Key specifications include unpackaged_unit_width: 6.000 INCHES NOMINAL IN, supplementary_features: OPERATE DRILL PRESS AT 300RPM FOR ALUMINUM FITTINGS AND 600 RPM FOR STEEL FITTINGS RPM, unpackaged_unit_height: 4.000 INCHES NOMINAL IN, unpackaged_unit_length: 12.000 INCHES NOMINAL IN, end_item_identification: F-110-GE-100/F101-GE-102/F-110-GE129/F-118-GE-100/F-110-GE-400/F-118-GE101 ENGINE PROGRAMS, reference_data_and_literature: F33657-97-C-0016. This part is cataloged in the U.S.
Government catalog under NSN 4920-01-469-8430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| unpackaged_unit_width | 6.000 INCHES NOMINAL IN |
| functional_description | REFACING KIT 2C6527 C/O A DRIVER ASSEMBLY AND SEVEN DIFFERENT SIZED CUTTERS AND COLLETS. THE CUTTERS AND COLLETS ARE DESIGNED TO RESURFACE SIZES-3,-4,-5,-6,-8,-10 AND -12 AN FITTINGS |
| supplementary_features | OPERATE DRILL PRESS AT 300RPM FOR ALUMINUM FITTINGS AND 600 RPM FOR STEEL FITTINGS RPM |
| unpackaged_unit_height | 4.000 INCHES NOMINAL IN |
| unpackaged_unit_length | 12.000 INCHES NOMINAL IN |
| end_item_identification | F-110-GE-100/F101-GE-102/F-110-GE129/F-118-GE-100/F-110-GE-400/F-118-GE101 ENGINE PROGRAMS |
| reference_data_and_literature | F33657-97-C-0016 |
| part_name_assigned_by_controlling_agency | KIT,REFACING-SPHERICAL FITTINGS, EXTERNAL |
| NSN | 4920-01-469-8430 |
| UNPACKAGED UNIT LENGTH | 12.000 INCHES NOMINAL IN |
| SUPPLEMENTARY FEATURES | OPERATE DRILL PRESS AT 300RPM FOR ALUMINUM FITTINGS AND 600 RPM FOR STEEL FITTINGS RPM |
| REFERENCE DATA AND LITERATURE | F33657-97-C-0016 |
| UNPACKAGED UNIT WIDTH | 6.000 INCHES NOMINAL IN |
| UNPACKAGED UNIT HEIGHT | 4.000 INCHES NOMINAL IN |
| SPECIAL FEATURES | DRIVER ASSY C/O A BODY WITH A HANDLE, A SHAFT SUPPORTED ON NEEDLE BEARINGS, A CAP AND A SLEEVE.THE SAFT IS SEALED AT EACH END BY O-RINGS. A BALL THRUST BEARING ABSORBS THE THRUST LOAD DURING OPERATION. THE AXIAL POSITION OF THE SHAFT IS ADJUSTED BY A NUT AND LOCKED WITH A JAM NUT. THE SHAFT IS EXTENDED TO ALLOW IT TO BE GRIPPED IN A DRILL CHUCK |
| FUNCTIONAL DESCRIPTION | REFACING KIT 2C6527 C/O A DRIVER ASSEMBLY AND SEVEN DIFFERENT SIZED CUTTERS AND COLLETS. THE CUTTERS AND COLLETS ARE DESIGNED TO RESURFACE SIZES-3,-4,-5,-6,-8,-10 AND -12 AN FITTINGS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | KIT,REFACING-SPHERICAL FITTINGS, EXTERNAL |
| END ITEM IDENTIFICATION | F-110-GE-100/F101-GE-102/F-110-GE129/F-118-GE-100/F-110-GE-400/F-118-GE101 ENGINE PROGRAMS |
No substitute or cross-reference records for this part.