PartsTable
Technical Data Sheet
PartsTable / MRO / 2C15
2C15 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include width: 0.437 INCHES NOMINAL IN, length: 0.500 INCHES NOMINAL IN, material: CERAMIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.310 INCHES MAXIMUM IN, body_height: 0.150 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-125-0791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2C15
NSN: 5340-00-125-0791
FSC: 5340
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
width0.437 INCHES NOMINAL IN
length0.500 INCHES NOMINAL IN
materialCERAMIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.310 INCHES MAXIMUM IN
body_height0.150 INCHES MAXIMUM IN
body_length0.320 INCHES MAXIMUM IN
hole_diameter0.1405 INCHES NOMINAL IN
overall_height0.812 INCHES NOMINAL IN
terminal_length1.500 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OVERALL
terminal_diameter0.020 INCHES NOMINAL IN
NSN5340-00-125-0791
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2C15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.500 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.500 INCHES NOMINAL IN
•
WIDTH: 0.437 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.1405 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.500 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.500 INCHES NOMINAL IN
WIDTH0.437 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SURFACE TREATMENTPHOSPHATE OVERALL
OVERALL HEIGHT0.812 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
HOLE DIAMETER0.1405 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6-S-20-192-50Interchangeable
interchangeable cross-reference
interchangeable
130024Interchangeable
interchangeable cross-reference
interchangeable
130024P33Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2C15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2C15?
2C15 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2C15?
There are 3 known substitutes for 2C15: 6-S-20-192-50, 130024, 130024P33. Substitute compatibility should be verified for your specific system.
What is the NSN for 2C15?
2C15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-125-0791. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2C15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026