PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2AG368
2AG368 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FINISHING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, recess_angle: 120.0 DEGREES NOMINAL, hole_diameter: 0.140 INCHES NOMINAL IN, overall_height: 0.297 INCHES NOMINAL IN, outside_diameter: 1.875 INCHES NOMINAL IN, style_designator: FINISHING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-164-1147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2AG368
NSN: 5310-01-164-1147
FSC: 5310
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
recess_angle120.0 DEGREES NOMINAL
hole_diameter0.140 INCHES NOMINAL IN
overall_height0.297 INCHES NOMINAL IN
outside_diameter1.875 INCHES NOMINAL IN
style_designatorFINISHING
surface_treatmentZINC OR CADMIUM OVERALL
material_thickness0.0598 INCHES NOMINAL IN
NSN5310-01-164-1147
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2AG368 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.140 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OR CADMIUM OVERALL
•
STYLE DESIGNATOR: FINISHING
•
MATERIAL: STEEL OVERALL
•
RECESS ANGLE: 120.0 DEGREES NOMINAL
•
MATERIAL THICKNESS: 0.0598 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.140 INCHES NOMINAL IN
SURFACE TREATMENTZINC OR CADMIUM OVERALL
STYLE DESIGNATORFINISHING
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.297 INCHES NOMINAL IN
RECESS ANGLE120.0 DEGREES NOMINAL
MATERIAL THICKNESS0.0598 INCHES NOMINAL IN
OUTSIDE DIAMETER1.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
250256Interchangeable
interchangeable cross-reference
interchangeable
590A5Interchangeable
interchangeable cross-reference
interchangeable
14073014Interchangeable
interchangeable cross-reference
interchangeable
2060A4Interchangeable
interchangeable cross-reference
interchangeable
137678Interchangeable
interchangeable cross-reference
interchangeable
PR-151-HG-2-FE1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2AG368?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2AG368?
2AG368 is a WASHER,FINISHING.
What parts can replace 2AG368?
There are 6 known substitutes for 2AG368: 250256, 590A5, 14073014 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2AG368?
2AG368 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-164-1147. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2AG368

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026