PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29X10
29X10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, supplementary_features: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-119-4731, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29X10
NSN: 5330-00-119-4731
FSC: 5330
CAGE: 30157 — MIDWESTERN MFG CO (USA)
SPECIFICATIONS
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
NSN5330-00-119-4731
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29X10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: CS-301 FSCM 03938 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
BOLT HOLE QUANTITY: 6
•
APERTURE DIAMETER: 3.203 INCHES NOMINAL IN
•
MATERIAL: CELLULOSE AND RUBBER SYNTHETIC OVERALL
•
OUTSIDE DIAMETER: 4.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONCS-301 FSCM 03938 MFR REF SINGLE MATERIAL RESPONSE OVERALL
BOLT HOLE QUANTITY6
APERTURE DIAMETER3.203 INCHES NOMINAL IN
MATERIALCELLULOSE AND RUBBER SYNTHETIC OVERALL
OUTSIDE DIAMETER4.375 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT CIRCLE DIAMETER3.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
8N10Interchangeable
interchangeable cross-reference
interchangeable
40132-3PC107Interchangeable
interchangeable cross-reference
interchangeable
29X10Interchangeable
interchangeable cross-reference
interchangeable
16336Interchangeable
interchangeable cross-reference
interchangeable
442081Interchangeable
interchangeable cross-reference
interchangeable
1103047PC29X10Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29X10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29X10?
29X10 is a GASKET.
What parts can replace 29X10?
There are 6 known substitutes for 29X10: 8N10, 40132-3PC107, 29X10 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29X10?
29X10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-119-4731. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29X10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026