PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29A1419-2
29A1419-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.594 INCHES NOMINAL IN, length: 0.312 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, overall_height: 0.609 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-662-9787, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29A1419-2
NSN: 5340-00-662-9787
FSC: 5340
CAGE: 93663 — I T I ELECTRONICS, INC. (USA)
SPECIFICATIONS
width0.594 INCHES NOMINAL IN
length0.312 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
overall_height0.609 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.500 INCHES NOMINAL IN
distance_from_loop_center_to_end0.328 INCHES NOMINAL IN
NSN5340-00-662-9787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29A1419-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.328 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
LOOP/HOLDING DIMENSION: 0.500 INCHES NOMINAL IN
•
WIDTH: 0.594 INCHES NOMINAL IN
•
LENGTH: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END0.328 INCHES NOMINAL IN
OVERALL HEIGHT0.609 INCHES NOMINAL IN
HOLE DIAMETER0.135 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
LOOP/HOLDING DIMENSION0.500 INCHES NOMINAL IN
WIDTH0.594 INCHES NOMINAL IN
LENGTH0.312 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
2000691Interchangeable
interchangeable cross-reference
interchangeable
1115065Interchangeable
interchangeable cross-reference
interchangeable
128712HInterchangeable
interchangeable cross-reference
interchangeable
500500Interchangeable
interchangeable cross-reference
interchangeable
50W0500Interchangeable
interchangeable cross-reference
interchangeable
TH-15Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29A1419-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29A1419-2?
29A1419-2 is a CLIP,SPRING TENSION.
What parts can replace 29A1419-2?
There are 22 known substitutes for 29A1419-2: 2000691, 1115065, 128712H and 19 more. Substitute compatibility should be verified for your specific system.
Is 29A1419-2 still available?
29A1419-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29A1419-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026