PartsTable
Technical Data Sheet
Download PDF

29925 — WIRING HARNESS,BRANCHED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

29925: WIRING HARNESS,BRANCHED.

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, case_style: SQUARE, seal_width: 0.703 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: SQUARE, outside_diameter: 4.008 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-585-9876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29925
NSN: 5330-00-585-9876
NIINs: 005859876, 009830783, 011787129
FSC: 5330 — Packing and Gasket Materials
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
case_styleSQUARE
seal_width0.703 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
first_end_styleSQUARE
outside_diameter4.008 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.250 INCHES NOMINAL IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
NSN5330-00-585-9876
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29925 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.703 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 4.008 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.703 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER4.008 INCHES NOMINAL IN
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 4
A1205U723Reference document
Same NSN cross-reference
Reference document — Secondary reference
400BM3T8Reference document
Same NSN cross-reference
Reference document — Secondary reference
1651280C91Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
475013RRRSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 29925?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29925?
29925 is a WIRING HARNESS,BRANCHED.
What parts can replace 29925?
There are 4 known substitutes for 29925: A1205U723, 400BM3T8, 1651280C91 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29925?
29925 is cataloged in the U.S. Government catalog under NSN 5330-00-585-9876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29925

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.