PartsTable
Technical Data Sheet
Download PDF

29881PC35 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

29881PC35: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.929 INCHES MINIMUM AND 1.009 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-199-3113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29881PC35
NSN: 5310-00-199-3113
FSC: 5310 — Nuts and Washers
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.929 INCHES MINIMUM AND 1.009 INCHES MAXIMUM IN
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
width_across_flats2.538 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
nominal_thread_size1.750 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch8
nondefinitive_spec/std_data2 TYPE AND H SYMBOL
NSN5310-00-199-3113
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 29881PC35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 2.538 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
•
THREAD SERIES: UN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.750 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND H SYMBOL
•
NUT HEIGHT: 0.929 INCHES MINIMUM AND 1.009 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS2.538 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
THREAD SERIESUN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.750 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND H SYMBOL
NUT HEIGHT0.929 INCHES MINIMUM AND 1.009 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH8
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
MILS1222TYPE2HReference document
Same NSN cross-reference
Reference document — Identification reference
MIL-DTL-1222Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 29881PC35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29881PC35?
29881PC35 is a NUT,PLAIN,HEXAGON.
What parts can replace 29881PC35?
There are 2 known substitutes for 29881PC35: MILS1222TYPE2H, MIL-DTL-1222. Substitute compatibility should be verified for your specific system.
What is the NSN for 29881PC35?
29881PC35 is cataloged in the U.S. Government catalog under NSN 5310-00-199-3113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29881PC35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.