PartsTable
Technical Data Sheet
PartsTable / MRO / 29797
29797 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- S-Kit (no media and software inclueded)<br>- Capacity: 400-800GB<br>- Interface: Ultra 320 SCSI wide (LVD)<br>- Dimension: 5.25” Half Height<br>- Front Panel: Black & White<br>- SCSI cable<br>. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.562 INCHES NOMINAL IN, thread_class: 2B SINGLE MOUNTING FACILITY, overall_width: 2.500 INCHES MAXIMUM IN, pole_quantity: 2 SINGLE SECTION FRONT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-6393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 29797
NSN: 5330-00-178-6393
FSC: 5330
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.562 INCHES NOMINAL IN
thread_class2B SINGLE MOUNTING FACILITY
overall_width2.500 INCHES MAXIMUM IN
pole_quantity2 SINGLE SECTION FRONT
terminal_typeTAB W/SCREW
overall_height2.500 INCHES MAXIMUM IN
overall_length2.250 INCHES NOMINAL IN
throw_quantity1 SINGLE SECTION REAR
attachment_typeHOLE
filtration_rate10.000 CUBIC FEET PER MINUTE NOMINAL
NSN5330-00-178-6393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29797 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 4.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.562 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
HOUSING BORE DIAMETER4.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.562 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
5325PL0822355Interchangeable
interchangeable cross-reference
interchangeable
5158372Interchangeable
interchangeable cross-reference
interchangeable
PC5158372Interchangeable
interchangeable cross-reference
interchangeable
JH3116Interchangeable
interchangeable cross-reference
interchangeable
PA12Interchangeable
interchangeable cross-reference
interchangeable
12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29797?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29797?
29797 is a FILTER,AIRCRAFT INSTRUMENTS manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 29797?
There are 21 known substitutes for 29797: 5325PL0822355, 5158372, PC5158372 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29797?
29797 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-6393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29797

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026