PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 297669-1007
297669-1007 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 14.9984 INCHES MINIMUM AND 15.0000 INCHES MAXIMUM IN, overall_width: 1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
297669-1007
NSN: 3110-00-198-1376
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter14.9984 INCHES MINIMUM AND 15.0000 INCHES MAXIMUM IN
overall_width1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter18.9976 INCHES MINIMUM AND 19.0000 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
NSN3110-00-198-1376
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 297669-1007 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.9900 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODMACHINED
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL BALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL INNER RING
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
07-02762-0AInterchangeable
interchangeable cross-reference
interchangeable
2762Interchangeable
interchangeable cross-reference
interchangeable
M7405536-1Interchangeable
interchangeable cross-reference
interchangeable
00737 TY SH 47 ST 164Interchangeable
interchangeable cross-reference
interchangeable
2-52924-5Interchangeable
interchangeable cross-reference
interchangeable
S7P816Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 297669-1007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 297669-1007?
297669-1007 is a BEARING,BALL,ANNULAR.
What parts can replace 297669-1007?
There are 13 known substitutes for 297669-1007: 07-02762-0A, 2762, M7405536-1 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 297669-1007?
297669-1007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 297669-1007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026