PartsTable
Technical Data Sheet
Download PDF

29766 — GUIDE,DRILL

✓ Government record, cited
Clementoni · ORING SEAL
PRODUCT OVERVIEW

29766: GUIDE,DRILL.

Optimum capacity and performance for SMB environments This latest HP DDS/DAT drive provides optimum capacity, performance and price for small and medium business environments or enterprise workgroups requiring the highest capacity and performance DDS/DAT drive available. HP DAT 160 delivers a capacity of 160 GB on a single data cartridge and a transfer rate of up to 50 GB/hr (assuming a 2:1 compression ratio) to address today's real capacity and performance needs. At the same time this sixth generation DDS/DAT drive provides the proven reliability and two-generation backward compatibility that users of the world's most successful tape technology have come to expect.

The RoHS compliant HP DAT 160 drive comes with a choice of interfaces including USB for low-cost, universal plug-and-play, Ultra 160 SCSI 3 to meet the needs of legacy systems or SAS for the latest interface connectivity. Available in 3.5-inch and 5.25-inch Half-High form factors and both external and in This part is cataloged in the U.S. Government catalog under NSN 5340-01-073-3055, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
29766
NSN: 5340-01-073-3055
NIINs: 010733055, 014740524
FSC: 5340 — Hardware, Commercial
CAGE: 81873 — WOODWARD HRT INC (USA)
SPECIFICATIONS
special_features18MM AND 22MM MM
end_item_identificationLEVER BENDER
NSN5340-01-073-3055
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29766 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
LENGTH: 13.450 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: SPECIAL
•
PERIPHERAL SHAPE STYLE: RECTANGLE, ROUNDED CORNERS, FOUR EARS AN D HOLES
•
WIDTH: 5.659 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
•
HOLE DIAMETER: 0.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH0.375 INCHES NOMINAL IN
LENGTH13.450 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPESPECIAL
PERIPHERAL SHAPE STYLERECTANGLE, ROUNDED CORNERS, FOUR EARS AN D HOLES
WIDTH5.659 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY
HOLE DIAMETER0.220 INCHES NOMINAL IN
BODY THICKNESS0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
Manufacturer release date (catalog record)2019-03-15
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 29766?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29766?
29766 is a GUIDE,DRILL manufactured by Clementoni.
What is the NSN for 29766?
29766 is cataloged in the U.S. Government catalog under NSN 5340-01-073-3055. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29766