PartsTable
Technical Data Sheet
297-005-01 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYURETHANE TIRE, wheel_type: SOLID, tread_width: 2.000 INCHES NOMINAL IN, wheel_diameter: 5.000 INCHES NOMINAL IN, effective_height: 6.500 INCHES NOMINAL IN, special_features: THIS CASTER DOES NOT HAVE A BREAK INCLUDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-503-0030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
297-005-01
NSN: 5340-01-503-0030
FSC: 5340
CAGE: 0FC01 — SUNBELT DESIGN & DEVELOPMENT, INC (USA)
SPECIFICATIONS
materialPLASTIC POLYURETHANE TIRE
wheel_typeSOLID
tread_width2.000 INCHES NOMINAL IN
wheel_diameter5.000 INCHES NOMINAL IN
wheel_quantity1
effective_height6.500 INCHES NOMINAL IN
special_featuresTHIS CASTER DOES NOT HAVE A BREAK INCLUDED
style_designatorSWIVEL OFFSET
end_item_identification4910-01-464-9809
safe_operating_load_rating500.0 POUNDS NOMINAL LBS
NSN5340-01-503-0030
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 297-005-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SAFE OPERATING LOAD RATING: 500.0 POUNDS NOMINAL LBS
MATERIAL: ALUMINUM ALLOY BODY
STYLE DESIGNATOR: SWIVEL OFFSET
EFFECTIVE HEIGHT: 6.500 INCHES NOMINAL IN
WHEEL TYPE: SOLID
TREAD WIDTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SAFE OPERATING LOAD RATING500.0 POUNDS NOMINAL LBS
END ITEM IDENTIFICATION4910-01-464-9809
MATERIALALUMINUM ALLOY BODY
MATERIALPLASTIC POLYURETHANE TIRE
STYLE DESIGNATORSWIVEL OFFSET
EFFECTIVE HEIGHT6.500 INCHES NOMINAL IN
WHEEL TYPESOLID
TREAD WIDTH2.000 INCHES NOMINAL IN
WHEEL QUANTITY1
SPECIAL FEATURESTHIS CASTER DOES NOT HAVE A BREAK INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
23-1537-005Interchangeable
interchangeable cross-reference
interchangeable
7423697570Interchangeable
interchangeable cross-reference
interchangeable
050005Interchangeable
interchangeable cross-reference
interchangeable
297-005-03Interchangeable
interchangeable cross-reference
interchangeable
1F8805525007190Interchangeable
interchangeable cross-reference
interchangeable
297-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 297-005-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 297-005-01?
297-005-01 is a CASTER,SWIVEL.
What parts can replace 297-005-01?
There are 7 known substitutes for 297-005-01: 23-1537-005, 7423697570, 050005 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 297-005-01?
297-005-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-503-0030. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 297-005-01