PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 296A
296A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VALVE,ANGLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY, bonnet_type: PACKING RETAINING, connection_type: THREADED INTERNAL PIPE ALL ENDS, connection_style: PLAIN,OPTIONAL END(PIPE) ALL ENDS, style_designator: ANGLE, thread_direction: RIGHT-HAND ALL ENDS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-495-8290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
296A
NSN: 5330-00-495-8290
FSC: 5330
CAGE: 28265 — HERCULES ENGINE CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY
bonnet_typePACKING RETAINING
connection_typeTHREADED INTERNAL PIPE ALL ENDS
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
style_designatorANGLE
thread_directionRIGHT-HAND ALL ENDS
operating_pressure3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
flow_control_deviceSTEM
nominal_thread_size0.125 INCHES ALL ENDS IN
maximum_operating_temp450.0 FAHRENHEIT SINGLE RESPONSE DEGF
valve_operation_methodMANUAL
media_for_which_designedWATER-OIL-GAS SINGLE RESPONSE
NSN5330-00-495-8290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 296A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
21537Interchangeable
interchangeable cross-reference
interchangeable
M21Interchangeable
interchangeable cross-reference
interchangeable
2125AInterchangeable
interchangeable cross-reference
interchangeable
33042Interchangeable
interchangeable cross-reference
interchangeable
GF133Interchangeable
interchangeable cross-reference
interchangeable
CG5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 296A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 296A?
296A is a VALVE,ANGLE.
What parts can replace 296A?
There are 18 known substitutes for 296A: 21537, M21, 2125A and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 296A?
296A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-495-8290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 296A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026