PartsTable
Technical Data Sheet
Download PDF

2962-2 — FILTER,BAND PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2962-2: FILTER,BAND PASS.

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY TERMINALS, body_style: STRIP TYPE, body_width: 1.750 INCHES NOMINAL IN, body_height: 3.500 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN, body_material: METAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-073-7615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2962-2
NSN: 5340-00-073-7615
NIINs: 000737615, 009715783, 014091325, 014670895
FSC: 5340 — Hardware, Commercial
CAGE: 09445 — DUKES AEROSPACE, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY TERMINALS
body_styleSTRIP TYPE
body_width1.750 INCHES NOMINAL IN
body_height3.500 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
body_materialMETAL
inclosure_typeHERMETICALLY SEALED
overall_height4.000 INCHES NOMINAL IN
style_designatorRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
end_hole_diameter0.378 INCHES NOMINAL IN
board_overall_width0.400 INCHES IN
nominal_thread_size0.138 INCHES IN
NSN5340-00-073-7615
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2962-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 1.080 INCHES MINIMUM AND 1.085 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: IRREGULAR
•
BODY INSIDE DIAMETER: 1.060 INCHES MINIMUM AND 1.065 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
MATERIAL: ALUMINUM ALLOY
•
END HOLE DIAMETER: 0.378 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.400 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER1.080 INCHES MINIMUM AND 1.085 INCHES MAXIMUM IN
STYLE DESIGNATORIRREGULAR
BODY INSIDE DIAMETER1.060 INCHES MINIMUM AND 1.065 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
MATERIALALUMINUM ALLOY
END HOLE DIAMETER0.378 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
296-22AKASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2962-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2962-2?
2962-2 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2962-2?
There is 1 known substitute for 2962-2: 296-22AKA. Substitute compatibility should be verified for your specific system.
What is the NSN for 2962-2?
2962-2 is cataloged in the U.S. Government catalog under NSN 5340-00-073-7615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2962-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.