PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2960606-8-8-8-60
2960606-8-8-8-60 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 302.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, exterior_color: BLACK, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.406 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-394-9717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2960606-8-8-8-60
NSN: 4720-01-394-9717
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 302.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorBLACK
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.406 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.770 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
NSN4720-01-394-9717
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 2960606-8-8-8-60 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER BRAIDED POLYESTER CORD
•
THREAD CLASS: 2B FIRST END
•
MEASURING METHOD AND LENGTH: 60.000 INCHES NOMINAL OVERALL IN
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
HYDROSTATIC TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH LBS
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON AND WATER AND HYDRAULIC FLUID, WATER BASE AND ETHYLENE GLYCOL AND AIR SINGLE RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND FIRST END
INSIDE SURFACE CONDITIONSMOOTH
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED POLYESTER CORD AND OUTER LAYER BRAIDED POLYESTER CORD
THREAD CLASS2B FIRST END
MEASURING METHOD AND LENGTH60.000 INCHES NOMINAL OVERALL IN
SEAT ANGLE37.0 DEGREES FIRST END
HYDROSTATIC TEST PRESSURE1000.0 POUNDS PER SQUARE INCH LBS
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER AND HYDRAULIC FLUID, WATER BASE AND ETHYLENE GLYCOL AND AIR SINGLE RESPONSE
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
NOMINAL THREAD SIZE0.750 INCHES FIRST END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
132900Interchangeable
interchangeable cross-reference
interchangeable
1904455Interchangeable
interchangeable cross-reference
interchangeable
36800S7Interchangeable
interchangeable cross-reference
interchangeable
MS35207-261Interchangeable
interchangeable cross-reference
interchangeable
2216312Interchangeable
interchangeable cross-reference
interchangeable
AN520-10-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2960606-8-8-8-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2960606-8-8-8-60?
2960606-8-8-8-60 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 2960606-8-8-8-60?
There are 8 known substitutes for 2960606-8-8-8-60: 132900, 1904455, 36800S7 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2960606-8-8-8-60?
2960606-8-8-8-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-394-9717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2960606-8-8-8-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026