PartsTable
Technical Data Sheet
Download PDF

29546335 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

29546335: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: STEEL, design_type: FRICTION, special_features: ACROSS FLATS 1.25"; ORING .924X.116, VS, end_item_identification: MRAP MATV; RG-31 MRAP; MRAP MAXX PRO DASH ISS W/OGPK & CROWS; MEDIUM MINE PROTECTED VEHICLE - MMPV, part_name_assigned_by_controlling_agency: PLUG, SHIPPING, opening_inside_diameter_for_which_designed: 0.924 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-582-8624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29546335
NSN: 5340-01-582-8624
FSC: 5340 — Hardware, Commercial
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
materialSTEEL
design_typeFRICTION
special_featuresACROSS FLATS 1.25"; ORING .924X.116, VS
end_item_identificationMRAP MATV; RG-31 MRAP; MRAP MAXX PRO DASH ISS W/OGPK & CROWS; MEDIUM MINE PROTECTED VEHICLE - MMPV
part_name_assigned_by_controlling_agencyPLUG, SHIPPING
opening_inside_diameter_for_which_designed0.924 INCHES NOMINAL IN
NSN5340-01-582-8624
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29546335 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.924 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.924 INCHES NOMINAL IN
SPECIAL FEATURESACROSS FLATS 1.25"; ORING .924X.116, VS
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUG, SHIPPING
END ITEM IDENTIFICATIONMRAP MATV; RG-31 MRAP; MRAP MAXX PRO DASH ISS W/OGPK & CROWS; MEDIUM MINE PROTECTED VEHICLE - MMPV
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
4159201Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
29507970Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 29546335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29546335?
29546335 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 29546335?
There are 2 known substitutes for 29546335: 4159201, 29507970. Substitute compatibility should be verified for your specific system.
What is the NSN for 29546335?
29546335 is cataloged in the U.S. Government catalog under NSN 5340-01-582-8624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29546335