PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 295-12XA
295-12XA ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING ROLLER, bore_diameter: 0.7500 INCHES NOMINAL IN, overall_width: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, lubrication_material: GREASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-112-5563, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
295-12XA
NSN: 3110-00-112-5563
FSC: 3110
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING ROLLER
bore_diameter0.7500 INCHES NOMINAL IN
overall_width0.7500 INCHES NOMINAL IN
seal_quantity2
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
lubrication_materialGREASE
overall_outside_diameter1.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5563
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 295-12XA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: GREASE
•
OVERALL OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING ROLLER
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
ALIGNMENT TYPERIGID
LUBRICATION MATERIALGREASE
OVERALL OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING ROLLER
OVERALL WIDTH0.7500 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
BORE DIAMETER0.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
B1212Interchangeable
interchangeable cross-reference
interchangeable
15500Interchangeable
interchangeable cross-reference
interchangeable
16823Interchangeable
interchangeable cross-reference
interchangeable
B-1212-OHInterchangeable
interchangeable cross-reference
interchangeable
180101Interchangeable
interchangeable cross-reference
interchangeable
11-112Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 295-12XA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 295-12XA?
295-12XA is a BEARING,ROLLER,NEEDLE.
What parts can replace 295-12XA?
There are 19 known substitutes for 295-12XA: B1212, 15500, 16823 and 16 more. Substitute compatibility should be verified for your specific system.
Is 295-12XA still available?
295-12XA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 295-12XA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026