PartsTable
Technical Data Sheet
Download PDF

29498M47P01 — NUT,PLAIN,RECTANGULAR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

29498M47P01: NUT,PLAIN,RECTANGULAR.

The NUT,PLAIN,RECTANGULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLAIN, RECTANGULAR, nut_width: 0.775 INCHES NOMINAL IN, nut_height: 0.365 INCHES NOMINAL IN, nut_length: 1.350 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-568-0326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29498M47P01
NSN: 5310-00-568-0326
FSC: 5310 — Nuts and Washers
CAGE: 90748 — REPUBLIC FASTENER PRODUCTS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLAIN, RECTANGULAR
nut_width0.775 INCHES NOMINAL IN
nut_height0.365 INCHES NOMINAL IN
nut_length1.350 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresSPRING ATTACHED
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_size0.375 INCHES IN
thread_quantity_per_inch16
NSN5310-00-568-0326
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 29498M47P01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.775 INCHES NOMINAL IN
•
NUT LENGTH: 1.350 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.365 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
NUT WIDTH0.775 INCHES NOMINAL IN
NUT LENGTH1.350 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.365 INCHES NOMINAL IN
SPECIAL FEATURESSPRING ATTACHED
SURFACE TREATMENTZINC OVERALL
NUT STYLEPLAIN, RECTANGULAR
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 8
P1008Reference document
Same NSN cross-reference
Reference document — Secondary reference
B5-45-3110Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SM-A-949388-103Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
82A5048A1126-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0099-3-3008Reference document
Same NSN cross-reference
Reference document — Secondary reference
B47447Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 29498M47P01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29498M47P01?
29498M47P01 is a NUT,PLAIN,RECTANGULAR.
What parts can replace 29498M47P01?
There are 8 known substitutes for 29498M47P01: P1008, B5-45-3110, SM-A-949388-103 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29498M47P01?
29498M47P01 is cataloged in the U.S. Government catalog under NSN 5310-00-568-0326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29498M47P01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.