PartsTable
Technical Data Sheet
2946 ✓ Verified by PartsTable
Melissa & Doug · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Press them on, peel them off, let your personality show! My First Temporary Tattoos are wearable art for kids. Their bright colors, amazing details and kid-friendly themes look great on all skin tones. And they're so easy to use! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-032-2712, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 2946
NSN: 5340-00-032-2712
FSC: 5340
CAGE: 76786 — BUCKLES INTERNATIONAL, INC. (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL CORROSION RESISTING BODY
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACEROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
power_rating2.0 WATTS AVERAGE2.0 WATTS AVERAGE
inside_height0.250 INCHES NOMINAL IN
inside_length1.375 INCHES NOMINAL IN
outside_width0.375 INCHES NOMINAL IN
overall_width1.250 INCHES NOMINAL IN
heat_treatmentT-3511 SOLUTION HEAT TREATED
overall_length0.840 INCHES MINIMUM AND 0.840 INCHES MINIMUM AND 0.880 INCHES MAXIMUM0.880 INCHES MAXIMUM IN
first_tip_styleSQUARE END
frequency_range0.000 HERTZ MINIMUM AND 0.000 HERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM2.000 GIGAHERTZ MAXIMUM
NSN5340-00-032-2712
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2946 MFR: Melissa & Doug ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL
PAINTED FEATURE: NOT INCLUDED
OUTSIDE WIDTH: 0.375 INCHES NOMINAL IN
INSIDE LENGTH: 1.375 INCHES NOMINAL IN
INSIDE HEIGHT: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH2.688 INCHES NOMINAL IN
MATERIALSTEEL
PAINTED FEATURENOT INCLUDED
OUTSIDE WIDTH0.375 INCHES NOMINAL IN
INSIDE LENGTH1.375 INCHES NOMINAL IN
INSIDE HEIGHT0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
2946Upgraded Successor
successor cross-reference
successor
6515NCM071251Upgraded Successor
successor cross-reference
successor
10007LPUpgraded Successor
successor cross-reference
successor
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
12001Interchangeable
interchangeable cross-reference
interchangeable
2017140-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2946?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2946?
2946 is a CUP,VACUUM,DELIVERY ASSIST manufactured by Melissa & Doug. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2946?
There are 15 known substitutes for 2946: 2946, 6515NCM071251, 10007LP and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2946?
2946 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-032-2712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2946