PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29436
29436 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

TERMINAL JUNCTION BLOCK,SECTIONA. Key specifications include point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL, shank_style: STANDARD TAPER W/TANG, flute_length: 10.250 INCHES NOMINAL IN, overall_height: 3.0 MILLIMETERS NOMINAL MM, overall_length: 1.0000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-053-5673, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29436
NSN: 3110-00-053-5673
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OVERALL
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length10.250 INCHES NOMINAL IN
flute_quantity2
overall_height3.0 MILLIMETERS NOMINAL MM
overall_length1.0000 INCHES NOMINAL IN
outside_diameter3.5 MILLIMETERS NOMINAL MM
special_featuresHEALING ABUTMENT; NARROW PLATFORM; STERILE; UNIGRIP; FOR USE IN THE BRANEMARK DENTAL SYSTEM
cutting_end_styleGENERAL PURPOSE
left_flange_width0.0940 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
NSN3110-00-053-5673
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 29436 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
110 2-3/16Interchangeable
interchangeable cross-reference
interchangeable
10118Interchangeable
interchangeable cross-reference
interchangeable
0294360000Interchangeable
interchangeable cross-reference
interchangeable
970036Interchangeable
interchangeable cross-reference
interchangeable
AKZ4Interchangeable
interchangeable cross-reference
interchangeable
941AS119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29436?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29436?
29436 is a TERMINAL JUNCTION BLOCK,SECTIONA.
What parts can replace 29436?
There are 12 known substitutes for 29436: 110 2-3/16, 10118, 0294360000 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29436?
29436 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-053-5673. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29436

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026