PartsTable
Technical Data Sheet
Download PDF

294346-5-8 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

294346-5-8: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.344 INCHES NOMINAL IN, screw_material: STEEL, fastener_length: 0.656 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-783-2164, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
294346-5-8
NSN: 5305-00-783-2164
FSC: 5305 — Screws
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.344 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.656 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5305-00-783-2164
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 294346-5-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.656 INCHES NOMINAL IN
•
THREAD LENGTH: 0.344 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.656 INCHES NOMINAL IN
THREAD LENGTH0.344 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
3MFR213-3-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 294346-5-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 294346-5-8?
294346-5-8 is a SCREW,MACHINE.
What parts can replace 294346-5-8?
There is 1 known substitute for 294346-5-8: 3MFR213-3-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 294346-5-8?
294346-5-8 is cataloged in the U.S. Government catalog under NSN 5305-00-783-2164. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 294346-5-8