PartsTable
Technical Data Sheet
PartsTable / MRO / 294-39
294-39 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include cover: NOT PROVIDED, material: STEEL OVERALL, thickness: 0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN, key_height: 0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, point_type: CONVENTIONAL, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-2654, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 294-39
NSN: 5315-00-011-2654
FSC: 5315
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
coverNOT PROVIDED
materialSTEEL OVERALL
thickness0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
key_height0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
point_typeCONVENTIONAL
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
corner_shapeSQUARE ALL CORNERS
flange_width0.8750 INCHES NOMINAL IN
flute_length10.125 INCHES NOMINAL IN
terminal_typeQUICK DISCONNECT, MALE
flute_quantity2
NSN5315-00-011-2654
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 294-39 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1035 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
STARTING EDGE RADIUS: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
KEY HEIGHT: 0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
KEY SIZE DESIGNATION: WOODRUFF 29
•
STARTING EDGE SHAPE: ROUND
•
THICKNESS: 0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1035 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STARTING EDGE RADIUS0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
KEY HEIGHT0.526 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
KEY SIZE DESIGNATIONWOODRUFF 29
STARTING EDGE SHAPEROUND
THICKNESS0.375 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
OVERALL LENGTH1.713 INCHES MINIMUM AND 1.723 INCHES MAXIMUM IN
STYLE DESIGNATORROUND BOTTOM RELIEVED ENDS
HARDNESS RATING10.0 ROCKWELL C MINIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
294-39Interchangeable
interchangeable cross-reference
interchangeable
ATA3069-294-39Interchangeable
interchangeable cross-reference
interchangeable
53248Interchangeable
interchangeable cross-reference
interchangeable
10148Interchangeable
interchangeable cross-reference
interchangeable
310-RTInterchangeable
interchangeable cross-reference
interchangeable
231825Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 294-39?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 294-39?
294-39 is a COIL,RADIO FREQUENCY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 294-39?
There are 16 known substitutes for 294-39: 294-39, ATA3069-294-39, 53248 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 294-39?
294-39 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-011-2654. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 294-39

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026