PartsTable
Technical Data Sheet
PartsTable / MRO / 294-26
294-26 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: COPPER ALLOY SINGLE END, body_style: CYLINDRICAL, point_type: CONVENTIONAL, body_length: 0.422 INCHES NOMINAL IN, design_form: PREBENT, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-010-8212, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 294-26
NSN: 5365-00-010-8212
FSC: 5365
CAGE: 98889 — AEROCONTROLEX GROUP, INC. DIV TALLEY ACTUATORS (USA)
SPECIFICATIONS
materialCOPPER ALLOY SINGLE END
body_styleCYLINDRICAL
point_typeCONVENTIONAL
body_length0.422 INCHES NOMINAL IN
design_formPREBENT
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
constructionONE-PIECE
flute_length10.375 INCHES NOMINAL IN
thread_class2B SINGLE END
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
body_diameter0.785 INCHES NOMINAL IN
NSN5365-00-010-8212
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 294-26 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MATERIAL: STEEL
•
CONSTRUCTION: ONE-PIECE
•
APERTURE DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
CONSTRUCTIONONE-PIECE
APERTURE DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
110 1-7/8Interchangeable
interchangeable cross-reference
interchangeable
402Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
29426Interchangeable
interchangeable cross-reference
interchangeable
3G1616Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 294-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 294-26?
294-26 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 294-26?
There are 5 known substitutes for 294-26: 110 1-7/8, 402, GGG-D-751 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 294-26?
294-26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-010-8212. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 294-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026