PartsTable
Technical Data Sheet
Download PDF

293861PC2 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

293861PC2: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1211 OR STEEL COMP 1212 OR STEEL COMP 1213 OVERALL, nut_style: HEXAGON, nut_height: 0.312 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, special_features: COUNTERSUNK BOTH SIDES OF THREAD TO MAJOR DIAMETER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-220-6627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
293861PC2
NSN: 5310-00-220-6627
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 1211 OR STEEL COMP 1212 OR STEEL COMP 1213 OVERALL
nut_styleHEXAGON
nut_height0.312 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
special_featuresCOUNTERSUNK BOTH SIDES OF THREAD TO MAJOR DIAMETER
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats1.625 INCHES NOMINAL IN
nominal_thread_size1.250 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch12
NSN5310-00-220-6627
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 293861PC2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.625 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18411,CLASS 2 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.250 INCHES IN
•
NUT HEIGHT: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.625 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18411,CLASS 2 MIL SPEC ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.250 INCHES IN
NUT HEIGHT0.312 INCHES NOMINAL IN
SPECIAL FEATURESCOUNTERSUNK BOTH SIDES OF THREAD TO MAJOR DIAMETER
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 293861PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 293861PC2?
293861PC2 is a NUT,PLAIN,HEXAGON.
What is the NSN for 293861PC2?
293861PC2 is cataloged in the U.S. Government catalog under NSN 5310-00-220-6627. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 293861PC2