PartsTable
Technical Data Sheet
Download PDF

293632PC6 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

293632PC6: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL, nut_style: HEXAGON, nut_height: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), special_features: TWO 0.188 IN. DIA HOLES SPACED 0.30 IN.

FROM WASHER FACED END 180 DEG. APART ON FLATS IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-262-4989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
293632PC6
NSN: 5310-00-262-4989
FSC: 5310 — Nuts and Washers
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
nut_styleHEXAGON
nut_height0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
special_featuresTWO 0.188 IN. DIA HOLES SPACED 0.30 IN. FROM WASHER FACED END 180 DEG. APART ON FLATS IN
thread_directionRIGHT-HAND
width_across_flats1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch10
nondefinitive_spec/std_data1 TYPE
NSN5310-00-262-4989
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 293632PC6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,COND C FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582,COND A ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582,COND C ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763,COND A FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763,COND C FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
NUT HEIGHT: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,COND C FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582,COND A ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582,COND C ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763,COND A FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763,COND C FED SPEC 3RD MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE
NUT HEIGHT0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
SPECIAL FEATURESTWO 0.188 IN. DIA HOLES SPACED 0.30 IN. FROM WASHER FACED END 180 DEG. APART ON FLATS IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSLOTTED HEX NUT
NUT STYLEHEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
MIL-S-1222, TYP E 1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MILB857TYPEAReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-1222J TYPE 1Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 293632PC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 293632PC6?
293632PC6 is a NUT,PLAIN,HEXAGON.
What parts can replace 293632PC6?
There are 3 known substitutes for 293632PC6: MIL-S-1222, TYP E 1, MILB857TYPEA, MIL-DTL-1222J TYPE 1. Substitute compatibility should be verified for your specific system.
What is the NSN for 293632PC6?
293632PC6 is cataloged in the U.S. Government catalog under NSN 5310-00-262-4989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 293632PC6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.