PartsTable
Technical Data Sheet
Download PDF

293198PC10 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

293198PC10: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.569 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-271-2876, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
293198PC10
NSN: 5305-00-271-2876
FSC: 5305 — Screws
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.500 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.569 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch20
NSN5305-00-271-2876
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 293198PC10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.569 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY FASTENER LENGTH AND THREAD CLASS
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.569 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.500 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY FASTENER LENGTH AND THREAD CLASS
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIALCOPPER ALLOY
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
703-1554056 P/N 22Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FFS92TYPE1STYLE2SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 293198PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 293198PC10?
293198PC10 is a SCREW,MACHINE.
What parts can replace 293198PC10?
There are 2 known substitutes for 293198PC10: 703-1554056 P/N 22, FFS92TYPE1STYLE2S. Substitute compatibility should be verified for your specific system.
What is the NSN for 293198PC10?
293198PC10 is cataloged in the U.S. Government catalog under NSN 5305-00-271-2876. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 293198PC10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.