PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 293-14
293-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include color: OFF-WHITE, material: PLASTIC EPOXY, nut_style: SLOTTED, HEXAGON, nut_height: 0.500 INCHES NOMINAL IN, seal_width: 0.750 INCHES NOMINAL IN, thread_class: 3B. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-1474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
293-14
NSN: 5330-00-097-1474
FSC: 5330
CAGE: 24785 — VICKERS INC (USA)
SPECIFICATIONS
colorOFF-WHITE
materialPLASTIC EPOXY
nut_styleSLOTTED, HEXAGON
nut_height0.500 INCHES NOMINAL IN
seal_width0.750 INCHES NOMINAL IN
thread_class3B
physical_formLIQUID
thread_seriesUNEF
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
special_featuresREQUIRES DISPENSING GUN AND MIXING NOZZLE (NOT INCLUDED WITH CARTRIDGE)
thread_directionRIGHT-HAND
features_providedSEPARATE CATALYST
NSN5330-00-097-1474
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 293-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
SEAL WIDTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
019205Interchangeable
interchangeable cross-reference
interchangeable
2084165Interchangeable
interchangeable cross-reference
interchangeable
54556HInterchangeable
interchangeable cross-reference
interchangeable
960215-8Interchangeable
interchangeable cross-reference
interchangeable
293-14Interchangeable
interchangeable cross-reference
interchangeable
3G1636Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 293-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 293-14?
293-14 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 293-14?
There are 13 known substitutes for 293-14: 019205, 2084165, 54556H and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 293-14?
293-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-1474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 293-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026