PartsTable
Technical Data Sheet
PartsTable / O-RING / 292965R1
292965R1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 6.525 INCHES NOMINAL IN, center_hole_diameter: 5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-065-4929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
292965R1
NSN: 5331-00-065-4929
FSC: 5331 — O-RING
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter6.525 INCHES NOMINAL IN
center_hole_diameter5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-00-065-4929
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 292965R1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 6.525 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
CENTER HOLE DIAMETER5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER6.525 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
AMS-R-7362Interchangeable
interchangeable cross-reference
interchangeable
AS568-437Interchangeable
interchangeable cross-reference
interchangeable
MS29561-331Interchangeable
interchangeable cross-reference
interchangeable
AMS7267Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 292965R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 292965R1?
292965R1 is a O-RING.
What parts can replace 292965R1?
There are 4 known substitutes for 292965R1: AMS-R-7362, AS568-437, MS29561-331 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 292965R1?
292965R1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-065-4929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 292965R1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026