PartsTable
Technical Data Sheet
Download PDF

292898 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

292898: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include inner_groove_width: 0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, peripheral_diameter: 1.338 INCHES NOMINAL IN, center_hole_diameter: 0.954 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN, cross-sectional_height: 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-125-6280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
292898
NSN: 5330-01-125-6280
FSC: 5330 — Packing and Gasket Materials
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
inner_groove_width0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
peripheral_diameter1.338 INCHES NOMINAL IN
center_hole_diameter0.954 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
cross-sectional_height0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
NSN5330-01-125-6280
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 292898 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.338 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.954 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.338 INCHES NOMINAL IN
INNER GROOVE WIDTH0.062 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.954 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
10510621Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 292898?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 292898?
292898 is a RETAINER,PACKING.
What parts can replace 292898?
There is 1 known substitute for 292898: 10510621. Substitute compatibility should be verified for your specific system.
What is the NSN for 292898?
292898 is cataloged in the U.S. Government catalog under NSN 5330-01-125-6280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 292898

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.