PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 292720R91
292720R91 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, outside_diameter: 3.355 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.350 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-0986, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
292720R91
NSN: 5330-00-641-0986
FSC: 5330
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
outside_diameter3.355 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.350 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-641-0986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 292720R91 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
OUTSIDE DIAMETER: 3.355 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
OUTSIDE DIAMETER3.355 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
HOUSING BORE DIAMETER3.350 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER2.375 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
9T31Y3377Interchangeable
interchangeable cross-reference
interchangeable
23699Interchangeable
interchangeable cross-reference
interchangeable
930C507P1Interchangeable
interchangeable cross-reference
interchangeable
141202060Interchangeable
interchangeable cross-reference
interchangeable
RCR07GF751JMInterchangeable
interchangeable cross-reference
interchangeable
102-000060Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 292720R91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 292720R91?
292720R91 is a SEAL,PLAIN ENCASED.
What parts can replace 292720R91?
There are 28 known substitutes for 292720R91: 9T31Y3377, 23699, 930C507P1 and 25 more. Substitute compatibility should be verified for your specific system.
Is 292720R91 still available?
292720R91 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 292720R91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026