PartsTable
Technical Data Sheet
Download PDF

29242-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

29242-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL, end_radius: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, fork_depth: 1.290 INCHES MINIMUM AND 1.310 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN, overall_width: 0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-063-2732, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29242-1
NSN: 5340-01-063-2732
FSC: 5340 — Hardware, Commercial
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OVERALL
end_radius0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
fork_depth1.290 INCHES MINIMUM AND 1.310 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
overall_width0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
thread_length0.700 INCHES NOMINAL ROD CONNECTION IN
fork_span_width0.341 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
overall_diameter0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentPASSIVATE OVERALL
NSN5340-01-063-2732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29242-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.341 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.168 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
END RADIUS: 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.700 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.341 INCHES MINIMUM AND 0.346 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
FORK ARM THICKNESS0.168 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
END RADIUS0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
THREAD LENGTH0.700 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5640 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 29242-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29242-1?
29242-1 is a CLEVIS,ROD END.
What is the NSN for 29242-1?
29242-1 is cataloged in the U.S. Government catalog under NSN 5340-01-063-2732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29242-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.