PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 29211
29211 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ATTENUATOR,FIXED is a the manufacturer industrial component. Key specifications include length: 285.0 MILLIMETERS NOMINAL MM, diameter: 1.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-180-9869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
29211
NSN: 5330-00-180-9869
FSC: 5330
CAGE: 12736 — CLAYTON MANUFACTURING COMPANY (USA)
SPECIFICATIONS
length285.0 MILLIMETERS NOMINAL MM
diameter1.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
power_rating2.0 WATTS AVERAGE
physical_formPASTE
overall_length1.020 INCHES NOMINAL IN
frequency_range0.000 HERTZ MINIMUM AND 12.000 GIGAHERTZ MAXIMUM
mounting_methodCONNECTOR
NSN5330-00-180-9869
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 29211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 2.004 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 1.000 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: VERTICAL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
HOUSING BORE DIAMETER2.004 INCHES NOMINAL IN
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.000 INCHES NOMINAL IN
SEALING ELEMENT STYLEVERTICAL
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
TEMP RATING-50.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
16-229Interchangeable
interchangeable cross-reference
interchangeable
29211Interchangeable
interchangeable cross-reference
interchangeable
763-1446-001Interchangeable
interchangeable cross-reference
interchangeable
560C-12Interchangeable
interchangeable cross-reference
interchangeable
716-091368Interchangeable
interchangeable cross-reference
interchangeable
1065585-21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 29211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 29211?
29211 is a ATTENUATOR,FIXED.
What parts can replace 29211?
There are 14 known substitutes for 29211: 16-229, 29211, 763-1446-001 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 29211?
29211 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-180-9869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 29211

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026