292014 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

292014: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, bore_diameter: 0.771 INCHES NOMINAL IN, coil_quantity: 4 1/2, inside_diameter: 0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-545-6929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

292014

NSN: 5360-00-545-6929
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 31361 — WOODWARD, INC. (USA)

SPECIFICATIONS

end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
bore_diameter	0.771 INCHES NOMINAL IN
coil_quantity	4 1/2
inside_diameter	0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
style_designator	CYLINDRICAL
spring_free_length	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
spring_solid_length	0.600 INCHES NOMINAL IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	605.000 POUNDS PER INCH NOMINAL LBS
accommodated_rod_diameter	0.540 INCHES NOMINAL IN
spring_free_outside_diameter	0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
NSN	5360-00-545-6929

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

SPRING SOLID LENGTH: 0.600 INCHES NOMINAL IN

•

ACCOMMODATED ROD DIAMETER: 0.540 INCHES NOMINAL IN

•

STYLE DESIGNATOR: CYLINDRICAL

•

SPRING FREE LENGTH: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN

•

SPRING DEFLECTION RATE: 605.000 POUNDS PER INCH NOMINAL LBS

•

INSIDE DIAMETER: 0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH	0.600 INCHES NOMINAL IN
ACCOMMODATED ROD DIAMETER	0.540 INCHES NOMINAL IN
STYLE DESIGNATOR	CYLINDRICAL
SPRING FREE LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
SPRING DEFLECTION RATE	605.000 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER	0.535 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
COIL QUANTITY	4 1/2
COIL HELIX DIRECTION	RIGHT-HAND OR LEFT-HAND

SUBSTITUTES & CROSS-REFERENCES 1

292012Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 292014?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 292014?

292014 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 292014?

There is 1 known substitute for 292014: 292012. Substitute compatibility should be verified for your specific system.

What is the NSN for 292014?

292014 is cataloged in the U.S. Government catalog under NSN 5360-00-545-6929. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

292014 — SPRING,HELICAL,COMPRESSION

Request a Quote — 292014