PartsTable TECHNICAL DATA SHEET
NSN 2920-01-107-9930Government record, cited

Generator, Engine Accessory2920-01-107-9930

NSN 2920-01-107-9930 · NIIN 011079930 · Part number N1350-1
C E Niehoff & Co · FSC 2920 — Engine Electrical System Components, Nonaircraft · FSG 29 — Engine Accessories · CAGE 76761
Government record, cited
NSN 2920-01-107-9930 — this item is cataloged by the U.S. Government under National Stock Number 2920-01-107-9930. Manufacturer of record part number: N1350-1.
Also searched as  2920-01-107-9930 · 2920011079930 · NIIN 011079930 · 01-107-9930 · FSC 2920 Engine Electrical System Components, Nonaircraft · CAGE 76761 · N1350-1 · 12295268
Nearby stock numbers  ·
Features
  • Generator,engine Accessory — FSC 2920
  • Spline Minor Diameter: 0.565 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
  • Shaft Drive End Style: SPLINED SHAFT END
  • Spline Width: 0.625 INCHES NOMINAL IN
  • Spline Length: 0.675 INCHES NOMINAL IN
  • Mounting Style: SQUARE FLANGE W/FOUR MTG HOLES
  • Voltage in Volts: 24.0
  • Mounting Hole Diameter: 0.525 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN
Identification
  • NSN: 2920-01-107-9930
  • NIIN: 011079930
  • FSC: 2920 — Engine Electrical System Components, Nonaircraft
  • FSG: 29 — Engine Accessories
  • Primary part number: N1350-1
  • Manufacturer: C E Niehoff & Co
General Description

The Generator,engine Accessory, cataloged under National Stock Number 2920-01-107-9930, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. The manufacturer of record is C E Niehoff & Co. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN2920-01-107-9930
Primary Part NumberN1350-1
Item NameGenerator,engine Accessory
FSC / FSG2920 / 29 — Engine Electrical System Components, Nonaircraft
ManufacturerC E Niehoff & Co
StatusACTIVE
Spline Minor Diameter0.565 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
Shaft Drive End StyleSPLINED SHAFT END
Spline Width0.625 INCHES NOMINAL IN
Spline Length0.675 INCHES NOMINAL IN
Mounting StyleSQUARE FLANGE W/FOUR MTG HOLES
Voltage in Volts24.0
Mounting Hole Diameter0.525 INCHES MINIMUM AND 0.555 INCHES MAXIMUM IN
Spline Major Diameter0.757 INCHES NOMINAL IN
Shaft Rotation DirectionCLOCKWISE OR COUNTERCLOCKWISE
Spline Quantity10
Mounting Hole Circle Radius9.750 INCHES NOMINAL IN
SubmersibilityNONSUBMERSIBLE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
N1350-1 PRIMARY C E Niehoff & Co (USA)
12295268 U S Army Tank Automotive Command Amsta-Im-Mm (USA)
No interchangeability data on file.
Other items in FSC 2920 — Engine Electrical System Components, Nonaircraft
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
2920-00-000-0088
INSTALLATION KIT,AL
2920-00-000-0183
GENERATOR,ENGINE ACCESSORY
2920-00-000-0194
2920-00-000-0194 · Item name not on file
2920-00-001-3474
COIL,MAGNETO
2920-00-001-3843
PLATE ASSY,ARMATURE
2920-00-001-6184
2920-00-001-6184 · Item name not on file
2920-00-001-6185
2920-00-001-6185 · Item name not on file
2920-00-001-8891
2920-00-001-8891 · Item name not on file

Frequently Asked Questions

What is NSN 2920-01-107-9930?

NSN 2920-01-107-9930 is a Generator,engine Accessory, manufactured by C E Niehoff & Co, classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.

What part numbers are listed for NSN 2920-01-107-9930?

NSN 2920-01-107-9930 has 2 manufacturer part numbers on file: N1350-1 (C E Niehoff & Co), 12295268 (U S Army Tank Automotive Command Amsta-Im-Mm).

What are the specifications of N1350-1?

Key specifications for N1350-1: Spline Minor Diameter: 0.565 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN; Shaft Drive End Style: SPLINED SHAFT END; Spline Width: 0.625 INCHES NOMINAL IN; Spline Length: 0.675 INCHES NOMINAL IN. 12 specifications are documented in the U.S. Government catalog.

Is NSN 2920-01-107-9930 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com