The Generator,engine Accessory, cataloged under National Stock Number 2920-00-624-9017, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2920-00-624-9017 |
| Primary Part Number | 6249017 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — Engine Electrical System Components, Nonaircraft |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Spline Minor Diameter | 0.874 INCHES NOMINAL IN |
| Shaft Drive End Style | SPLINED SHAFT END, THREADED |
| Distance Between Outside Surfaces of Hinge Bracket | 7.250 INCHES NOMINAL IN |
| Grounding Method | INTERNAL |
| Spline Width | 0.217 INCHES NOMINAL IN |
| Thread Series | UNF |
| Distance Between Inside Surfaces of Hinge Bracket | 6.062 INCHES NOMINAL IN |
| Thread Length | 0.688 INCHES NOMINAL IN |
| Bottom Mounting Hole Diameter | 0.627 INCHES MINIMUM AND 0.629 INCHES MAXIMUM IN |
| Spline Length | 2.306 INCHES MINIMUM AND 2.346 INCHES MAXIMUM IN |
| Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| Voltage in Volts | 24.0 |
| Rectifier Location | SEPARATE |
| Thread Diameter | 0.625 INCHES NOMINAL IN |
| Spline Major Diameter | 0.875 INCHES NOMINAL IN |
| Armature Minimum Speed in RPM at Full Current Output | 600 |
| Shaft Rotation Direction | CLOCKWISE |
| Angular Deviation of First Hole From Top Center in Deg | 15.0 |
| Mounting Hole Thread Diameter | 0.438 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Spline Quantity | 6 |
| Mounting Hole Thread Direction | RIGHT-HAND |
| Minimum Current Cut-in Speed in RPM | 400 |
| Mounting Hole Thread Quantity Per Inch | 20 |
| Maximum Rated Armature Speed in RPM | 1125 |
| Environmental Protection | CORROSION RESISTANT AND FUNGUS RESISTANT |
| Thread Quantity Per Inch | 18 |
| Maximum Output Current Rating in Amps | 55.0 |
| Furnished Items | DRIVE PULLEY |
| Mounting Hole Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6249017 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
NSN 2920-00-624-9017 is a Generator,engine Accessory, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.
NSN 2920-00-624-9017 has 1 manufacturer part number on file: 6249017 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 6249017: Spline Minor Diameter: 0.874 INCHES NOMINAL IN; Shaft Drive End Style: SPLINED SHAFT END, THREADED; Distance Between Outside Surfaces of Hinge Bracket: 7.250 INCHES NOMINAL IN; Grounding Method: INTERNAL. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.