The Generator,engine Accessory, cataloged under National Stock Number 2920-00-605-0737, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. The manufacturer of record is United Technologies Corp Electro Systems Inc. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2920-00-605-0737 |
| Primary Part Number | GRC2440C217 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — Engine Electrical System Components, Nonaircraft |
| Manufacturer | United Technologies Corp Electro Systems Inc |
| Status | ACTIVE |
| Distance Between Shaft Center and Bottom Mounting Hole Center | 3.062 INCHES NOMINAL IN |
| Shaft Drive End Style | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| Grounding Method | INTERNAL |
| Thread Series | UNF |
| Distance From End to Keyway Center | 1.428 INCHES NOMINAL IN |
| Thread Length | 0.688 INCHES NOMINAL IN |
| Bottom Mounting Hole Diameter | 0.484 INCHES NOMINAL IN |
| Mounting Style | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| Voltage in Volts | 24.0 |
| Thread Diameter | 0.500 INCHES NOMINAL IN |
| Armature Minimum Speed in RPM at Full Current Output | 3000 |
| Shaft Rotation Direction | COUNTERCLOCKWISE |
| Thread Direction | RIGHT-HAND |
| Second Step Diameter | 0.750 INCHES NOMINAL IN |
| Pilot Diameter | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN |
| Minimum Current Cut-in Speed in RPM | 2300 |
| Pilot Height | 0.822 INCHES NOMINAL IN |
| Keyway Length | 0.750 INCHES NOMINAL IN |
| Maximum Rated Armature Speed in RPM | 6000 |
| Center to Center Distance Between Mounting Slots | 3.625 INCHES NOMINAL IN |
| Keyway Width | 0.156 INCHES NOMINAL IN |
| Environmental Protection | FUNGUS RESISTANT |
| Ground Polarity Type | NEGATIVE |
| Center to Center Distance Between Top Mounting Slot and Bottom Mounting Hole | 5.875 INCHES NOMINAL IN |
| Thread Quantity Per Inch | 20 |
| Submersibility | NONSUBMERSIBLE |
| Maximum Output Current Rating in Amps | 40.0 |
| Slot Width | 0.531 INCHES MINIMUM AND 0.609 INCHES MAXIMUM IN |
| Unthreaded Portion Length | 1.343 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GRC2440C217 PRIMARY | United Technologies Corp Electro Systems Inc (USA) |
| 2D4185 | Caterpillar Inc Div Caterpillar Defense (USA) |
| Reference | Meaning |
|---|---|
| GRC2440C217 | 5/9 Secondary reference Ambac International Corporation Div Ambac International |
NSN 2920-00-605-0737 is a Generator,engine Accessory, manufactured by United Technologies Corp Electro Systems Inc, classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.
NSN 2920-00-605-0737 has 2 manufacturer part numbers on file: GRC2440C217 (United Technologies Corp Electro Systems Inc), 2D4185 (Caterpillar Inc Div Caterpillar Defense).
Key specifications for GRC2440C217: Distance Between Shaft Center and Bottom Mounting Hole Center: 3.062 INCHES NOMINAL IN; Shaft Drive End Style: STRAIGHT SHAFT END, THREADED, W/KEYWAY; Grounding Method: INTERNAL; Thread Series: UNF. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 2920-00-605-0737 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.