The Generator,engine Accessory, cataloged under National Stock Number 2920-00-529-9916, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. The manufacturer of record is Borgwarner Pds (anderson), L.l.c.. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2920-00-529-9916 |
| Primary Part Number | 1102948 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — Engine Electrical System Components, Nonaircraft |
| Manufacturer | Borgwarner Pds (anderson), L.l.c. |
| Status | ACTIVE |
| Distance Between Shaft Center and Bottom Mounting Hole Center | 3.062 INCHES NOMINAL IN |
| Shaft Drive End Style | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| Distance Between Outside Surfaces of Hinge Bracket | 7.918 INCHES MINIMUM AND 7.936 INCHES MAXIMUM IN |
| Grounding Method | EXTERNAL |
| Thread Series | UN |
| Distance From End to Keyway Center | 0.900 INCHES NOMINAL IN |
| Distance Between Inside Surfaces of Hinge Bracket | 7.118 INCHES MINIMUM AND 7.136 INCHES MAXIMUM IN |
| Thread Length | 0.490 INCHES NOMINAL IN |
| Bottom Mounting Hole Diameter | 0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN |
| Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| Voltage in Volts | 12.0 |
| Thread Diameter | 0.625 INCHES NOMINAL IN |
| Armature Minimum Speed in RPM at Full Current Output | 1560 |
| Shaft Rotation Direction | CLOCKWISE |
| Mounting Hole Thread Class | 2B |
| Angular Deviation of First Hole From Top Center in Deg | 193.0 |
| Mounting Hole Thread Diameter | 0.312 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Second Step Diameter | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM IN |
| Mounting Hole Thread Direction | RIGHT-HAND |
| Minimum Current Cut-in Speed in RPM | 980 |
| Keyway Length | 0.625 INCHES NOMINAL IN |
| Distance Between Shaft Center and Top Mounting Hole Center | 3.060 INCHES NOMINAL IN |
| Mounting Hole Thread Quantity Per Inch | 18 |
| Maximum Rated Armature Speed in RPM | 7200 |
| Keyway Width | 0.125 INCHES NOMINAL IN |
| Environmental Protection | CORROSION RESISTANT AND FUNGUS RESISTANT |
| Ground Polarity Type | NEGATIVE OR POSITIVE |
| Thread Quantity Per Inch | 20 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1102948 PRIMARY | Borgwarner Pds (anderson), L.l.c. (USA) |
| Reference | Meaning |
|---|---|
| 1102948 | 5/9 Secondary reference General Motors Corp |
| 1102948 | 5/9 Secondary reference General Motors Corp Delco Remy Div |
NSN 2920-00-529-9916 is a Generator,engine Accessory, manufactured by Borgwarner Pds (anderson), L.l.c., classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.
NSN 2920-00-529-9916 has 1 manufacturer part number on file: 1102948 (Borgwarner Pds (anderson), L.l.c.).
Key specifications for 1102948: Distance Between Shaft Center and Bottom Mounting Hole Center: 3.062 INCHES NOMINAL IN; Shaft Drive End Style: STRAIGHT SHAFT END, THREADED, W/KEYWAY; Distance Between Outside Surfaces of Hinge Bracket: 7.918 INCHES MINIMUM AND 7.936 INCHES MAXIMUM IN; Grounding Method: EXTERNAL. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.