The Generator,engine Accessory, cataloged under National Stock Number 2920-00-351-9606, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. The manufacturer of record is Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings). Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2920-00-351-9606 |
| Primary Part Number | CS2920-0011 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — Engine Electrical System Components, Nonaircraft |
| Manufacturer | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| Status | ACTIVE |
| Distance Between Shaft Center and Bottom Mounting Hole Center | 2.094 INCHES NOMINAL IN |
| Shaft Drive End Style | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| Distance Between Outside Surfaces of Hinge Bracket | 8.234 INCHES NOMINAL IN |
| Grounding Method | EXTERNAL |
| Thread Series | UNF |
| Distance From End to Keyway Center | 0.750 INCHES NOMINAL IN |
| Distance Between Inside Surfaces of Hinge Bracket | 7.125 INCHES NOMINAL IN |
| Thread Length | 0.375 INCHES NOMINAL IN |
| Bottom Mounting Hole Diameter | 0.328 INCHES NOMINAL IN |
| Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| Voltage in Volts | 6.0 |
| Thread Diameter | 0.500 INCHES NOMINAL IN |
| Armature Minimum Speed in RPM at Full Current Output | 2500 |
| Shaft Rotation Direction | CLOCKWISE |
| Mounting Hole Thread Class | 2B |
| Angular Deviation of First Hole From Top Center in Deg | 0.0 |
| Mounting Hole Thread Diameter | 0.375 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND |
| Second Step Diameter | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Mounting Hole Thread Direction | RIGHT-HAND |
| Minimum Current Cut-in Speed in RPM | 960 |
| Keyway Length | 0.750 INCHES NOMINAL IN |
| Distance Between Shaft Center and Top Mounting Hole Center | 2.094 INCHES NOMINAL IN |
| Mounting Hole Thread Quantity Per Inch | 16 |
| Maximum Rated Armature Speed in RPM | 8000 |
| Keyway Width | 0.156 INCHES NOMINAL IN |
| Ground Polarity Type | POSITIVE |
| Thread Quantity Per Inch | 20 |
| Submersibility | NONSUBMERSIBLE |
| Maximum Output Current Rating in Amps | 13.5 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| YB16A | Heil Environmental Industries (USA) |
| CS2920-0011 PRIMARY | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| WUD2400 | Schramm, Inc. (USA) |
| YB16A | Wisconsin Motors, Llc (USA) |
NSN 2920-00-351-9606 is a Generator,engine Accessory, manufactured by Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings), classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.
NSN 2920-00-351-9606 has 4 manufacturer part numbers on file: YB16A (Heil Environmental Industries), CS2920-0011 (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)), WUD2400 (Schramm, Inc.), YB16A (Wisconsin Motors, Llc).
Key specifications for CS2920-0011: Distance Between Shaft Center and Bottom Mounting Hole Center: 2.094 INCHES NOMINAL IN; Shaft Drive End Style: STRAIGHT SHAFT END, THREADED, W/KEYWAY; Distance Between Outside Surfaces of Hinge Bracket: 8.234 INCHES NOMINAL IN; Grounding Method: EXTERNAL. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.