The Generator,engine Accessory, cataloged under National Stock Number 2920-00-349-1312, is classified within Federal Supply Class 2920 (No Item Name Available) of the Engine Accessories group. The primary manufacturer of record is General Motors Corp AC-Delco Div Government Order Dept. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 2920-00-349-1312 |
| Primary Part Number | 1105872 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — No Item Name Available |
| Manufacturer | General Motors Corp AC-Delco Div Government Order Dept |
| Status | CANCELLED |
| Second Step Diameter | 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM IN |
| Unthreaded Portion Length | 1.312 INCHES NOMINAL IN |
| Mounting Hole Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Distance Between Inside Surfaces of Hinge Bracket | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM IN |
| FSC Application Data | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| Distance Between Outside Surfaces of Hinge Bracket | 8.125 INCHES NOMINAL IN |
| Mounting Hole Thread Diameter | 0.312 INCHES NOMINAL IN |
| Distance Between Shaft Center and Top Mounting Hole Center | 3.500 INCHES NOMINAL IN |
| Voltage in Volts | 6.0 |
| Thread Diameter | 0.500 INCHES NOMINAL IN |
| Thread Class | 2A A |
| Shaft Drive End Style | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| Shaft Rotation Direction | CLOCKWISE |
| Angular Deviation of First Hole From Top Center in Deg | 193.0 |
| Mounting Hole Thread Quantity Per Inch | 18 |
| Thread Quantity Per Inch | 20 |
| Mounting Hole Thread Class | 2B |
| Maximum Output Current Rating in Amps | 25.0 |
| Armature Minimum Speed in RPM at Full Current Output | 1150 |
| Grounding Method | INTERNAL |
| Ground Polarity Type | NEGATIVE OR POSITIVE |
| Distance From End to Keyway Center | 1.375 INCHES NOMINAL IN |
| Angular Deviation of Second Hole From First Hole in Deg | 159.0 |
| Distance Between Shaft Center and Bottom Mounting Hole Center | 3.875 INCHES NOMINAL IN |
| Thread Series | UNF |
| Bottom Mounting Hole Diameter | 0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN |
| Mounting Hole Thread Direction | RIGHT-HAND |
| Keyway Length | 0.625 INCHES NOMINAL IN |
| Submersibility | NONSUBMERSIBLE |
| Keyway Width | 0.125 INCHES NOMINAL IN |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
NSN 2920-00-349-1312 is a Generator,engine Accessory, manufactured by General Motors Corp AC-Delco Div Government Order Dept, classified under FSC 2920 (No Item Name Available). Status: cancelled.
NSN 2920-00-349-1312 has 4 cross-referenced part numbers: 1105872 (General Motors Corp AC-Delco Div Government Order Dept), 1105872 (General Motors Corp Delco Remy Div), 1105872 (Borgwarner Pds (anderson), L.l.c.), 1105872 (General Motors Corp).
There is 1 known substitute for 2920-00-349-1312: 5998-00-444-2917. Verify interchangeability with system specifications before substitution.
Key specifications for 1105872: Second Step Diameter: 0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM IN; Unthreaded Portion Length: 1.312 INCHES NOMINAL IN; Mounting Hole Thread Series Designator: UNIFIED NATIONAL COARSE (UNC); Distance Between Inside Surfaces of Hinge Bracket: 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 2920-00-349-1312 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.