The Generator,engine Accessory, cataloged under National Stock Number 2920-00-294-3932, is classified within Federal Supply Class 2920 (Engine Electrical System Components, Nonaircraft) of the Engine Accessories group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2920-00-294-3932 |
| Item Name | Generator,engine Accessory |
| FSC / FSG | 2920 / 29 — Engine Electrical System Components, Nonaircraft |
| Status | ACTIVE |
| Mounting Hole Quantity | 3 |
| Distance Between Shaft Center and Bottom Mounting Hole Center | 3.875 INCHES NOMINAL IN |
| Terminal Quantity | 2 |
| Shaft Drive End Style | STRAIGHT SHAFT END W/KEYWAY |
| Distance Between Outside Surfaces of Hinge Bracket | 8.250 INCHES NOMINAL IN |
| Terminal Type | THREADED STUD |
| Distance From End to Keyway Center | 0.333 INCHES NOMINAL IN |
| Distance Between Inside Surfaces of Hinge Bracket | 7.250 INCHES NOMINAL IN |
| Unpackaged Unit Length | 8.750 INCHES NOMINAL IN |
| Bottom Mounting Hole Diameter | 0.312 INCHES NOMINAL IN |
| Mounting Style | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| Voltage in Volts | 24.0 |
| Armature Minimum Speed in RPM at Full Current Output | 2000 |
| Shaft Rotation Direction | CLOCKWISE |
| Mounting Hole Thread Class | 1B |
| Angular Deviation of First Hole From Top Center in Deg | 193.0 |
| Unpackaged Unit Width | 5.250 INCHES NOMINAL IN |
| Mounting Hole Thread Diameter | 0.250 INCHES NOMINAL IN |
| Mounting Hole Thread Direction | RIGHT-HAND |
| Minimum Current Cut-in Speed in RPM | 1850 |
| Unpackaged Unit Height | 5.250 INCHES NOMINAL IN |
| Keyway Length | 0.500 INCHES NOMINAL IN |
| Distance Between Shaft Center and Top Mounting Hole Center | 3.625 INCHES NOMINAL IN |
| Mounting Hole Thread Quantity Per Inch | 20 |
| Maximum Rated Armature Speed in RPM | 2050 |
| Keyway Width | 0.125 INCHES NOMINAL IN |
| Environmental Protection | CORROSION RESISTANT AND FUNGUS RESISTANT |
| Submersibility | NONSUBMERSIBLE |
| Maximum Output Current Rating in Amps | 10.0 |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL B — Remove Demilitarization Key Points |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1105955 | C/1 Advisory reference — outside the item-of-supply concept Borgwarner Pds (anderson), L.l.c. |
| 1105955 | 5/9 Secondary reference General Motors Corp |
| 1105955 | 3/9 Design control — primary reference General Motors Corp Delco Remy Div |
NSN 2920-00-294-3932 is a Generator,engine Accessory, classified under FSC 2920, Engine Electrical System Components, Nonaircraft. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 6625-01-334-5219. Verify interchangeability with system specifications before substitution.
Key specifications for 2920-00-294-3932: Mounting Hole Quantity: 3; Distance Between Shaft Center and Bottom Mounting Hole Center: 3.875 INCHES NOMINAL IN; Terminal Quantity: 2; Shaft Drive End Style: STRAIGHT SHAFT END W/KEYWAY. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 2920-00-294-3932 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.