PartsTable
Technical Data Sheet
292-12 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include length: 150.0 MILLIMETERS NOMINAL MM, diameter: 1.25 MILLIMETERS NOMINAL MM, material: COPPER ALLOY FLOW CONTROL DEVICE, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, drive_type: SCREW SLOT, design_type: THREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-7231, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
292-12
NSN: 5340-00-290-7231
FSC: 5340
CAGE: 99166 — SUNDSTRAND CORP SUNDSTRAND HYDRAULICS DIV (USA)
SPECIFICATIONS
length150.0 MILLIMETERS NOMINAL MM
diameter1.25 MILLIMETERS NOMINAL MM
materialCOPPER ALLOY FLOW CONTROL DEVICE
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
drive_typeSCREW SLOT
design_typeTHREADED
power_rating2.0 WATTS AVERAGE AND 100.0 WATTS PEAK
thread_class3A A
overall_length0.840 INCHES MINIMUM AND 0.880 INCHES MAXIMUM IN
connection_typeTHREADED EXTERNAL PIPE ALL ENDS
frequency_range0.000 HERTZ MINIMUM AND 8.000 GIGAHERTZ MAXIMUM
mounting_methodCONNECTOR
NSN5340-00-290-7231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 292-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DRIVE TYPE: SCREW SLOT
DESIGN TYPE: THREADED
MATERIAL: PLASTIC
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 3/4-16 UNF
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
THREAD CLASS: 3A A
FEATURES PROVIDED: SHOULDER
TECHNICAL CHARACTERISTICS (FLIS)
DRIVE TYPESCREW SLOT
DESIGN TYPETHREADED
MATERIALPLASTIC
THREAD SIZE AND SERIES/TYPE DESIGNATOR3/4-16 UNF
OVERALL DIAMETER1.000 INCHES NOMINAL IN
THREAD CLASS3A A
FEATURES PROVIDEDSHOULDER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
1604-81YUpgraded Successor
successor cross-reference
successor
107B8219P2Upgraded Successor
successor cross-reference
successor
MP-81Upgraded Successor
successor cross-reference
successor
69969-81Upgraded Successor
successor cross-reference
successor
M5501/10-F3Upgraded Successor
successor cross-reference
successor
NAS845-1Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 292-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 292-12?
292-12 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 292-12?
There are 27 known substitutes for 292-12: 1604-81Y, 107B8219P2, MP-81 and 24 more. Substitute compatibility should be verified for your specific system.
Is 292-12 still available?
292-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 292-12