PartsTable
Technical Data Sheet
Download PDF

291367 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

291367: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.250 INCHES NOMINAL IN, material: STEEL BAND, loop_width: 4.938 INCHES NOMINAL IN, loop_length: 5.750 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, style_designator: MULTIPLE LOOP CENTER MOUNT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-301-6532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
291367
NSN: 5340-00-301-6532
FSC: 5340 — Hardware, Commercial
CAGE: 08645 — BRIGGS AND STRATTON CORP (USA)
SPECIFICATIONS
diameter0.250 INCHES NOMINAL IN
materialSTEEL BAND
loop_width4.938 INCHES NOMINAL IN
loop_length5.750 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
style_designatorMULTIPLE LOOP CENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end3.062 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole3.295 INCHES NOMINAL IN
NSN5340-00-301-6532
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 291367 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 4.938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: MULTIPLE LOOP CENTER MOUNT
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.062 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 3.295 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LOOP WIDTH4.938 INCHES NOMINAL IN
STYLE DESIGNATORMULTIPLE LOOP CENTER MOUNT
DIAMETER0.250 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END3.062 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE3.295 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP LENGTH5.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
292356Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 291367?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 291367?
291367 is a CLAMP,LOOP.
What parts can replace 291367?
There is 1 known substitute for 291367: 292356. Substitute compatibility should be verified for your specific system.
What is the NSN for 291367?
291367 is cataloged in the U.S. Government catalog under NSN 5340-00-301-6532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 291367

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.